ALLNET Switch smart managed 8 Port Gigabit 130W / 8x PoE+ / 2x SFP / Lüfterlos / 19" (ALL-SG8610PM)

• 8-Port 10/100/1000Mbit/s mit voller PoE Unterstützung
• 2x SFP Slots für optionale MiniGBICS
• PoE Leistung 4x a´ 30 Watt (IEEE802.3at oder 8x IEEE802.3af)
• LÜFTERLOSES DESIGN mit internem Netzteil
• Unterstützt L2+ Switching-Funktionen wie 802.1Q VLAN, Mirroring, Port-Isolation, IGMP Snooping, DHCP Snooping, LLDP, POE+ Management, IP Source Guard, ARP-Inspektion, ACLs etc.
• Unterstützung von Spanning Tree STP(802.1D) und RSTP(802.1W) und MSTP(802.1s).
• Unterstützung von erweitertem Management über WEB, CLI, TELNET, SSH, SNMP.
• Unterstützung von Kabeldiagnose und SFP DDM.
• Unterstützt PoE-Management, wie PoE-Zeitplan, PoE-PD-Alive.
• Unterstützt G.8032 quick ring Protokoll. Selbstwiederherstellungszeit <20ms.
• Unterstützt IEEE1588 v2, transparente Uhr (TC)
• Unterstützung DDM, SFP digitale Diagnoseüberwachung
• Unterstützung von IPV4- und IPV6-Funktionen für statisches Routing
• Unterstützung von Speicher- und CPU-Überwachung
• 4KV Überspannungsschutz, 6KV Kontakt/8KV Luftschutz
• PoE-Budget 130 W

Produkt-Beschreibung:

Der ALL-SG8610PM ist ein gemanagter Layer 2+ Gigabit PoE Switch, der über intelligente PoE-Funktionen verfügt, um die Verfügbarkeit von kritischen Geschäftsanwendungen zu verbessern. Er bietet IPv6/IPv4 Management und eine integrierte L2+ Gigabit Switching Engine zusammen mit 8*10/100/1000BASE-T Ports mit 30 Watt 802.3at PoE+ und 2 Gigabit SFP Slots. Mit einem Gesamtleistungsbudget von bis zu 130 W für verschiedene Arten von PoE-Anwendungen bietet er schnelle, sichere und kostengünstige Power-over-Ethernet-Netzwerklösungen für die IP-Überwachung in kleinen Unternehmen und Betrieben.
Der ALL-SG8610PM ist für erweiterte Switch-Management-Funktionen wie 802.1Q VLAN und Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Loop und BPDU Guard, IGMP Snooping und MLD Snooping programmiert. Außerdem ist das Link Layer Discovery Protocol (LLDP) als Layer-2-Protokoll enthalten, um grundlegende Informationen über benachbarte Geräte in der lokalen Broadcast-Domäne zu ermitteln.



Technische Daten:
 

Model	ALL-SG8610PM
Copper Ports	8-10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
Fiber Ports	2x1G BASE-X SFP interfaces, supports 100M/1G Mbps dual mode
PoE Ports	1~8-802.3af/802.3at PoE Injector Ports
Console Ports	1 x RS-232-to-RJ45 serial port (115200, 8, N, 1)
Switch Architecture	Store-and-Forward
Switch Fabric	20 Gbps/non-blocking
Throughput	14.88Mpps @64 bytes
Address Table	8K entries
Share Data Buffer	4 Mb
Jumbo Frame	9600 Bytes
SDRAM	1Gb
Flash Memory	128Mb
Flow Control	IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex
Reset Button	>2 sec.: Factory default and reset
Power Supply	100~240V AC, 50/60Hz, 4A (max.)
Power Consumption	Max.150 watts/1122 BTU
PoE Standards	IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type	Per Port 52V DC, 300mA. Max. 15.4 watts (IEEE 802.3af) Per Port 52V DC, 600mA. Max. 30 watts (IEEE 802.3at)
PoE Budget	130W
LED Indicators	Power: Green Solid on- power work normal, off- power disconnected System: Green Blink -work normally, solid on- soft work abnormal, fast Blink – soft upgrade PoE: Yellow Solid on- PoE work normally, Off- PoE doesn’t work, Blink - PoE overload 10/100/1000T RJ45 Interfaces (Port 1 to Port 8): 1000 LNK/ACT (Green) Blink - port connected with data transmission; Solid on- port connected without data transmission 100/1000Mbps SFP Interfaces (Port 9 to Port 10): Green Blink - port connected with data transmission; Solid on- port connected without data transmission
EMC	Surge Immunity: 4KV Per: IEC61000-4-5 ESD Protection: ESD Level 4 Per: IEC61000-4-2 EFT Level 4 Per: IEC61000-4-4
Layer2 Functions
Port configuration	Auto-negotiation Flow Control Port Mirror: TX/RX/BOTH; Many-to-1 monitor CPU Mirror Traffic statistics
Link Aggregation	Static link aggregation LACP(Dynamic Trunk/Static Trunk) Algorith based on Source/Destination MAC Algorithm based on Source/Destination IP
MAC Table	Aging Time Static MAC address Dynamic MAC address management
VLAN	4094 Active VLANs 4094 VID 802.1Q Tag VLAN Port VLAN Protocol VLAN MAC VLAN Voice VLAN 802.1ad Q-in-Q tunneling Private VLAN (Protected port) GARP/GVRP
ACL	256ACLs L2, L3 e L4 Time-based ACL IP ACL MAC ACL MAC-IP ACL User-Defined ACL ICMPv6
Spanning tree	802.1D Spanning Tree Protocol (STP) 802.1w Rapid Spanning Tree Protocol (RSTP) 802.1s Multiple Spanning Tree Protocol (MSTP) Loop Guard Root Guard TC-BPDU Guard BPDU Guard BPDU Filter
Ring Protection	<20ms G.8032 ERPS Ring Fast Ring
Multicast	256 groups IGMP v1/v2/v3 Snooping, Fast Leave MLD Snooping Multicast VLAN IGMP filter MVR Multicast Routing
QOS	8 mapping IDs to 8 level priority queues CoS port-based CoS 802.1p-based CoS DSCP-based Scheduling algorithms SP, WRR, SP+WRR Storm Control (Broadcast, Multicast, Unknown Unicast) Bandwidth control per port SWRR, DWRR for Scheduling Flow Redirect Precedence TOS Rate Limiting (Ingress/Egress) Stri Priority
Security Features	Port Security MAC address filter ARP Association (Manual, ARP scanning, DHCP snooping) ARP Protection AAA DAI DoS (Denial of Service) Classification of packages based on: End.MAC, IP End, TCP / UDP Ports, Protocol Type; 802.1x Authentication (port-based e MAC-based) TACACS/TACACS+ Authentication RADIUS Authentication DHCP Filter Guest VLAN SSLv2/SSLv3/TLSv1 SSHv1/SSHv2 Restriction of WEB access based on: IP Address, And. MAC and Port; Port Isolation Loopback detection
Management	SNMP v1/v2c/v3 with Full Private MIBs RMON 4 groups WEB (HTTP/HTTPS) CLI (Telnet, Console, SSHv1/v2) Firmware upgrade via console/web/TFTP Configuration Backup/Reload  Dual Firmware LLDP Configuration Export/Import                            CDP Aware OAM (IEEE802.3ah) CFM (IEEE802.1ag) sFlow
Synchronization, IEEE1588	Support IEEE1588v2 transparent clock
Other Features	DNS Client DHCP Relay DHCP Client DHCP Snooping DHCP Option 66 DHCP Option 67 DHCP Option 82 NTP/SNTP Client UPNP UDLD
PoE management	Total PoE power budget control Per port PoE function enable/disable PoE admin-mode control PoE port power feeding priority Per PoE port power limitation PD classification detection PD alive check PoE schedule Soft-reboot PoE Non-stop
Maintenance	Cable Diagnostics Ping SFP DDM (Digital Diagnostics Monitoring) Thermal protection System log (Local and Remote) Memory and CPU Monitoring
Layer 3 functions
Static Routing	IPv4 Unicast: Static Routing(Software Base) IPv6 Unicast: Static Routing(Software Base)
IPV6	IPv6 neighbor discovery (ND) Path maximum transmission unit (MTU) discovery Internet Control Message Protocol (ICMP) version 6 TCPv6/UDPv6 Ping6 Telnet(v6) Http/Https Interface IPV6 ACL IPV6
Dimension	280x213x44.5mm
Weight	2 kg
Working Temperature	-10°C to 45°C
Storage Temperature	-20°C to 70°C
MTBF	50,000hrs