ALLNET Switch smart managed 8 Port Gigabit 130W / 8x PoE+ / 2x SFP / Lüfterlos / 19" / "ALL-SG8610PM"
Art.-Nr. des Herstellers: 193997
Highlights:
- 8-Port 10/100/1000Mbit/s mit voller PoE Unterstützung
- 2x SFP Slots für optionale MiniGBICS
- PoE Leistung 4x a´ 30 Watt (IEEE802.3at oder 8x IEEE802.3af)
- LÜFTERLOSES DESIGN mit internem Netzteil
- Unterstützt L2+ Switching-Funktionen wie 802.1Q VLAN, Mirroring, Port-Isolation, IGMP Snooping, DHCP Snooping, LLDP, POE+ Management, IP Source Guard, ARP-Inspektion, ACLs etc.
- Unterstützung von Spanning Tree STP(802.1D) und RSTP(802.1W) und MSTP(802.1s).
- Unterstützung von erweitertem Management über WEB, CLI, TELNET, SSH, SNMP.
- Unterstützung von Kabeldiagnose und SFP DDM.
- Unterstützt PoE-Management, wie PoE-Zeitplan, PoE-PD-Alive.
- Unterstützt G.8032 quick ring Protokoll. Selbstwiederherstellungszeit <20ms.
- Unterstützt IEEE1588 v2, transparente Uhr (TC)
- Unterstützung DDM, SFP digitale Diagnoseüberwachung
- Unterstützung von IPV4- und IPV6-Funktionen für statisches Routing
- Unterstützung von Speicher- und CPU-Überwachung
- 4KV Überspannungsschutz, 6KV Kontakt/8KV Luftschutz
- PoE-Budget 130 W
Produkt-Beschreibung:
Der ALL-SG8610PM ist ein gemanagter Layer 2+ Gigabit PoE Switch, der über intelligente PoE-Funktionen verfügt, um die Verfügbarkeit von kritischen Geschäftsanwendungen zu verbessern. Er bietet IPv6/IPv4 Management und eine integrierte L2+ Gigabit Switching Engine zusammen mit 8*10/100/1000BASE-T Ports mit 30 Watt 802.3at PoE+ und 2 Gigabit SFP Slots. Mit einem Gesamtleistungsbudget von bis zu 130 W für verschiedene Arten von PoE-Anwendungen bietet er schnelle, sichere und kostengünstige Power-over-Ethernet-Netzwerklösungen für die IP-Überwachung in kleinen Unternehmen und Betrieben.Der ALL-SG8610PM ist für erweiterte Switch-Management-Funktionen wie 802.1Q VLAN und Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Loop und BPDU Guard, IGMP Snooping und MLD Snooping programmiert. Außerdem ist das Link Layer Discovery Protocol (LLDP) als Layer-2-Protokoll enthalten, um grundlegende Informationen über benachbarte Geräte in der lokalen Broadcast-Domäne zu ermitteln.
Technische Daten:
Model | ALL-SG8610PM |
Copper Ports | 8-10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
Fiber Ports | 2x1G BASE-X SFP interfaces, supports 100M/1G Mbps dual mode |
PoE Ports | 1~8-802.3af/802.3at PoE Injector Ports |
Console Ports | 1 x RS-232-to-RJ45 serial port (115200, 8, N, 1) |
Switch Architecture | Store-and-Forward |
Switch Fabric | 20 Gbps/non-blocking |
Throughput | 14.88Mpps @64 bytes |
Address Table | 8K entries |
Share Data Buffer | 4 Mb |
Jumbo Frame | 9600 Bytes |
SDRAM | 1Gb |
Flash Memory | 128Mb |
Flow Control | IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex |
Reset Button | >2 sec.: Factory default and reset |
Power Supply | 100~240V AC, 50/60Hz, 4A (max.) |
Power Consumption | Max.150 watts/1122 BTU |
PoE Standards | IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE |
PoE Power Supply Type | Per Port 52V DC, 300mA. Max. 15.4 watts (IEEE 802.3af) Per Port 52V DC, 600mA. Max. 30 watts (IEEE 802.3at) |
PoE Budget | 130W |
LED Indicators | Power: Green Solid on- power work normal, off- power disconnected System: Green Blink -work normally, solid on- soft work abnormal, fast Blink – soft upgrade PoE: Yellow Solid on- PoE work normally, Off- PoE doesn’t work, Blink - PoE overload 10/100/1000T RJ45 Interfaces (Port 1 to Port 8): 1000 LNK/ACT (Green) Blink - port connected with data transmission; Solid on- port connected without data transmission 100/1000Mbps SFP Interfaces (Port 9 to Port 10): Green Blink - port connected with data transmission; Solid on- port connected without data transmission |
EMC | Surge Immunity: 4KV Per: IEC61000-4-5 ESD Protection: ESD Level 4 Per: IEC61000-4-2 EFT Level 4 Per: IEC61000-4-4 |
Layer2 Functions | |
Port configuration | Auto-negotiation Flow Control Port Mirror: TX/RX/BOTH; Many-to-1 monitor CPU Mirror Traffic statistics |
Link Aggregation | Static link aggregation LACP(Dynamic Trunk/Static Trunk) Algorith based on Source/Destination MAC Algorithm based on Source/Destination IP |
MAC Table | Aging Time Static MAC address Dynamic MAC address management |
VLAN | 4094 Active VLANs 4094 VID 802.1Q Tag VLAN Port VLAN Protocol VLAN MAC VLAN Voice VLAN 802.1ad Q-in-Q tunneling Private VLAN (Protected port) GARP/GVRP |
ACL | 256ACLs L2, L3 e L4 Time-based ACL IP ACL MAC ACL MAC-IP ACL User-Defined ACL ICMPv6 |
Spanning tree | 802.1D Spanning Tree Protocol (STP) 802.1w Rapid Spanning Tree Protocol (RSTP) 802.1s Multiple Spanning Tree Protocol (MSTP) Loop Guard Root Guard TC-BPDU Guard BPDU Guard BPDU Filter |
Ring Protection | <20ms G.8032 ERPS Ring Fast Ring |
Multicast | 256 groups IGMP v1/v2/v3 Snooping, Fast Leave MLD Snooping Multicast VLAN IGMP filter MVR Multicast Routing |
QOS | 8 mapping IDs to 8 level priority queues CoS port-based CoS 802.1p-based CoS DSCP-based Scheduling algorithms SP, WRR, SP+WRR Storm Control (Broadcast, Multicast, Unknown Unicast) Bandwidth control per port SWRR, DWRR for Scheduling Flow Redirect Precedence TOS Rate Limiting (Ingress/Egress) Stri Priority |
Security Features | Port Security MAC address filter ARP Association (Manual, ARP scanning, DHCP snooping) ARP Protection AAA DAI DoS (Denial of Service) Classification of packages based on: End.MAC, IP End, TCP / UDP Ports, Protocol Type; 802.1x Authentication (port-based e MAC-based) TACACS/TACACS+ Authentication RADIUS Authentication DHCP Filter Guest VLAN SSLv2/SSLv3/TLSv1 SSHv1/SSHv2 Restriction of WEB access based on: IP Address, And. MAC and Port; Port Isolation Loopback detection |
Management | SNMP v1/v2c/v3 with Full Private MIBs RMON 4 groups WEB (HTTP/HTTPS) CLI (Telnet, Console, SSHv1/v2) Firmware upgrade via console/web/TFTP Configuration Backup/Reload Dual Firmware LLDP Configuration Export/Import CDP Aware OAM (IEEE802.3ah) CFM (IEEE802.1ag) sFlow |
Synchronization, IEEE1588 | Support IEEE1588v2 transparent clock |
Other Features | DNS Client DHCP Relay DHCP Client DHCP Snooping DHCP Option 66 DHCP Option 67 DHCP Option 82 NTP/SNTP Client UPNP UDLD |
PoE management | Total PoE power budget control Per port PoE function enable/disable PoE admin-mode control PoE port power feeding priority Per PoE port power limitation PD classification detection PD alive check PoE schedule Soft-reboot PoE Non-stop |
Maintenance | Cable Diagnostics Ping SFP DDM (Digital Diagnostics Monitoring) Thermal protection System log (Local and Remote) Memory and CPU Monitoring |
Layer 3 functions | |
Static Routing | IPv4 Unicast: Static Routing(Software Base) IPv6 Unicast: Static Routing(Software Base) |
IPV6 | IPv6 neighbor discovery (ND) Path maximum transmission unit (MTU) discovery Internet Control Message Protocol (ICMP) version 6 TCPv6/UDPv6 Ping6 Telnet(v6) Http/Https Interface IPV6 ACL IPV6 |
Dimension | 280x213x44.5mm |
Weight | 2 kg |
Working Temperature | -10°C to 45°C |
Storage Temperature | -20°C to 70°C |
MTBF | 50,000hrs |
Produktmerkmale:
Anzahl Ports PoE/LAN: | 8/0 |
Belüftung Switch: | Lüfterlos |
Einsatzort Switch: | 19" |
LAN Geschwindigkeit: | 1Gbit/S |
Management: | smart managed (WebGui) |
PoE Budget: | <200 Watt |
PoE Port Leistung: | 30W at |
SFP Geschwindigkeit: | SFP 1GBit |
SFP Port Anzahl: | 2 |
Hinweis zur Bedienungsanleitung und weiteren Downloads:
Die Lieferung des Gerätes erfolgt in der Regel mit einer englisch sprachigen Bedienungsanleitung. Weitere Downloads wie Firmwareupdates / Treiber oder ggf. auch deutschsprachige Kurzanleitungen finden Sie unter http://www.allnet.de/downloads.html. Wir übernehmen keinerlei Gewähr für Richtigkeit und / oder Funktionalität der Downloads, deren Nutzung auf eigenes Risiko erfolgt!
- Gigabit - Ports
- 8
- SFP - Ports
- 2
- Switch Management
- Smart managed
- Bauart
- Rackmount
- PoE Ports
- 8